Specific Operation Warnings - North Star 49436 Owner's Manual


Do not force the cleaner. Tools do a better and safer job when used in the manner for which they
are designed. Plan your work, and use the correct tool for the job.

Check for damaged parts before each use and before connecting the cleaner to a pressure
washer. Carefully check that the cleaner will operate properly and perform its intended function.
Replace damaged or worn parts immediately. Never operate the cleaner with a damaged part.

Store the cleaner when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the cleaner for good working condition prior to storage and again before re-use.

Use only replacement parts that are recommended by the distributor. Parts that may be suitable
for one cleaner may create a risk of injury when used with another cleaner. Never use a part that
has a lower operating pressure than the cleaner itself.

Do not leave the cleaner unattended when it is pressurized.

Do not turn the cleaner over when it is pressurized by connection to an operating pressure
washer to avoid high-pressure spraying water that could cause personal injury.

DO NOT exceed the rated PSI capacity.

Keep body parts clear of nozzle heads and away from skirt while operating machine.

DO NOT lift machine from surface or point nozzle heads at people while operating.

Wear the proper safety gear including ANSI Z87.1 approved safety glasses.

Use only on hard level surfaces.

No altercations shall be made to this product.

Only attachments and/or adapters supplied by the manufacturer shall be used.

Not for use by or around children.
CLEANER USE AND CARE

Specific Operation Warnings

Page 6 of 16