Table of Contents
Advertisement
Starting using another
battery
Check the electrolyte level and top up if
necessary (see "Checking levels").
Raise the protective cover on the (+)
terminal.
Connect the red cable to the positive
terminal (+) of the flat battery A , then to the
positive terminal (+) of the slave battery B .
Practical information
Connect one end of the green or black
cable to the negative terminal (-) of the
slave battery B .
Connect the other end of the green or black
cable to the earth point C on your vehicle
(engine mounting).
Operate the starter, let the engine run.
Wait until the engine returns to idle and
disconnect the cables.
7
201
Advertisement
Table of Contents
