Table of Contents
Advertisement
Driving
Cruise control
System which automatically maintains the vehicle speed at the value programmed by the driver, without any action on the accelerator pedal.
The cruise control is switched on manually:
the vehicle speed must be at least 25 mph
(40 km/h) and second gear or higher must be
engaged in the case of a manual gearbox.
The cruise control is switched off manually, by
an action on the brake or clutch pedal or if the
ASC system is triggered.
The programmed speed can be exceeded
temporarily by pressing the accelerator pedal.
To return to the programmed speed, simply
release the accelerator pedal.
Switching off the ignition cancels any
programmed speed value.
The cruise control cannot, in any
circumstances, take the place of the
need to comply with speed limits or of the
vigilance and responsibility of the driver.
126
Steering mounted controls
The controls of this system are grouped
together on the steering wheel.
1.
"ON/OFF" button: activation / deactivation
of the cruise control mode.
2. "COAST SET" button: store a driving
speed and decrease the cruising speed.
3. "ACC RES" button: increase the cruising
speed and recall the stored speed.
4. "CANCEL" button: stop control of the
vehicle's speed.
Display in the instrument panel
When you press button 1 , the "CRUISE"
indicator comes on in the instrument panel.
Programming
Press button 1 .
Set the programmed speed by
accelerating to the required speed, then
press button 2 "COAST SET" .
Advertisement
Table of Contents
