Table of Contents
Advertisement
CB60E
CITY SERIES
3. Slide backwall outer panel behind glass stopper bracket (if installed).
4. Install front end panel-place on unit as shown below.
5. Install middle outer panel.
BLACK ENAMEL INNER PANEL INSTALLATION
6. Install glass stopper (if desired) by sliding stopper assembly between
unit and panel - the stopper assembly will attach to the unit via a magnet,
adjust position of glass stopper is required.
7. Repeat steps 1-6 to install outer panels on opposite side.
8. With panel set installed -- complete by installing barrier glass.
9. Reverse all steps to remove panels.
installation
City Series CB60E-1 |
93
Advertisement
Table of Contents
