Table of Contents
Advertisement
CB60E CORNER
7. Lift the glass stop and open the glass.
8. Install lower inner liner panels.
9. Install the back panels by angling the bottom of each panel towards
the base of the firebox and then pushing them in.
920-175
10. Install the inner panel for the corner conversion by wedging it into the
inner lower liner panels.
11. Slide the inner side panel in by wedging it between the side glass and
the back liner panels.
12. Once the inner side panel is wedged in place, tighten the hanger
screws for the back liner panels.
2
installation
City Series CB60E-1 |
47
11.13.19
Advertisement
Table of Contents
