Advertisement
Contents
Connections
Setting the auto standby mode
You can set the unit to automatically switch to standby mode if the unit is
not operated for 15 minutes when there is no audio input (Auto standby
mode).
Auto standby mode is set to on by default.
Front panel
Rear panel
Playback
1
AMP POWER X
43
Remote control
unit
Settings
Tips
Press and hold AMP POWER X for 5 seconds or more
to switch it on and off.
The display changes as follows each time it is switched on and off.
When auto standby mode is on: "AutoStby On" is displayed.
0
When auto standby mode is off: "AutoStby Off" is displayed.
0
Index
Appendix
Advertisement
