Advertisement
Contents
Connections
B Click the "Advanced" tab.
C Select the sampling rate and bit rate to be applied to the D/A
converter.
It is recommended that "2 channel, 32 bit, 192000 Hz (Studio
0
Quality)" is selected.
D Click "Apply".
E Click "Test".
Check that audio from this unit is output from the PC.
0
e
Front panel
Rear panel
Playback
w
t
r
37
Remote control
unit
Settings
NOTE
0 The dedicated driver must be installed in the PC before this unit is connected to a
PC. Operation will not occur correctly if connected to the PC before the dedicated
driver has been installed.
0 Operation may fail in some PC hardware and software configurations.
0 Player software supporting the Audio Stream Input Output (ASIO) driver is
required to play files with a sampling frequency of 352.8 kHz/384 kHz without
downsampling. Check your player software before playing files with the ASIO
driver.
0 Please see the FAQ at www.denon.com if you experience any issues getting
audio to play from your computer through this unit. You may also want to check the
support pages for your audio player application.
Index
Tips
Appendix
Advertisement
