Advertisement
Contents
Connections
o Specifications of supported audio formats
See "D/A converter" (v p. 53).
NOTE
0 Perform operations such as playback and pause on the computer. At this time, you
cannot perform operations with buttons on this unit or the remote control.
0 When this unit is functioning as a D/A converter, sound is not output from the
computer's speakers.
0 If the computer is disconnected from this unit while the computer music playback
software is running, the playback software may freeze. Always exit the playback
software before disconnecting the computer.
0 When an error occurs on the computer, disconnect the USB cable and restart the
computer.
0 The sampling frequency of the music playback software and sampling frequency
displayed on this unit may differ.
0 Use a cable that is 3 m or less to connect to the computer.
Front panel
Rear panel
Playback
Settings
Connecting and playing back from a
digital device (Coaxial/Optical 1/Optical
2)
1
2
o Specifications of supported audio formats
See "D/A converter" (v p. 53).
NOTE
0 Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes
noise and could damage the speakers.
40
Remote control
unit
Tips
Connect digital device to this unit. (v p. 22)
Press the input source select button (COAXIAL or
OPTICAL 1/2) to switch the input source to "COAXIAL"
or "OPTICAL 1/2".
If the sampling frequency cannot be detected, "Unlocked" will be
0
displayed.
"Unsupported" is displayed when audio signals that are not
0
supported by this unit are input.
Index
Appendix
Advertisement
