Table of Contents
Advertisement
M.2 Solid State Drives
Up to two M.2 solid state drives (SSDs) can be installed on the RSC-UMR-8 riser card, with
some restrictions. One M.2 socket supports PCI-E and one supports SATA.
Several SSD lengths are supported—42mm, 60mm 80mm or 110mm. For each length, there
is a hole in the storage adapter card for a plastic standoff. The following combinations are
supported:
•
Two 42 or 60 mm
•
One 42 and one 80 mm
•
One 110 mm
To install two M.2 SSDs, you must order another standoff (P/N FST-SCRW-0074L)
SSD SATA
Holes for Standoffs
(choose one or two)
Socket
If using the M.2 SATA socket, connect the optional cable, CBL-SAST-0538, to the motherboard
at connectors S-SATA4 or S-SATA5.
M.2 onto RSC-UMR-8
Riser Card
Chapter 3: Maintenance and Component Installation
Figure 3-7. M.2 SSDs on the Riser Card
Figure 3-8. M.2 SSDs on a Riser Card
47
SSD PCI-E
Socket
Advertisement
Table of Contents
