Table of Contents
Advertisement
SuperServer 2029UZ-TN20R25M User's Manual
6.5 IPMI
Use this tab page to configure Intelligent Platform Management Interface (IPMI) settings.
When you select this submenu and press the <Enter> key, the following information will
display:
•
IPMI Firmware Revision: This item indicates the IPMI firmware revision used in your system.
•
Status of BMC: This item indicates the status of the BMC (Baseboard Management
Controller) installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled and Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
120
Advertisement
Table of Contents
