Table of Contents
Advertisement
Status
Continuously on and
red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
Chassis Front
The illustration below shows the features included on the front of the chassis. Externally
accessible hard drive carriers display status lights.
1
2
5
Item
Features
1
Control Panel
2
10 Drive Bays
3
10 Drive Bays
4
4 Drive Bays
Asset/Service
5
Tag
Information LED
Description
An overheat condition has occurred.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power
supply.
UID has been activated locally to locate the
server in a rack environment.
UID has been activated using IPMI to locate the
server in a rack environment.
Figure 1-2. Front View
Chassis Front Features
Description
Power buttons and status indicators
Ten NVMe drives from CPU1
Ten NVMe drives from CPU2
Four SATA drives; optional SAS by SAS controller card
Pull-out identifier
11
Chapter 1: Introduction
3
4
Advertisement
Table of Contents
