Zone Ii Remote Control Functions - Harman Kardon AVR 340 Owner's Manual

POWER
MUTE
A OFF
AVR VID 1 VID 2
B
AM/FM VID 3 VID 4
C
DVD CD
TAPE
D
DMP/The Bridge
E
PRESET TUNING
PLAY
DISC
SKIP
F
VOLUME
G
.2
å
∫
ç
∂
å Power Off Button
≠
∫ AVR Selector
ç AM/FM Tuner Selector
ƒ
∂ Input Selectors
≠ Preset Up/Down – Track Skip Buttons
©
ƒ Disc Skip Buttons
© Volume Up/Down Buttons
˙
˙ Pause Button
I
Stop Button
∆ Play Button
˚ Tuning Up/Down – Fast Play Buttons
¬ Mute Button

ZONE II REMOTE CONTROL FUNCTIONS

å Power Off Button: When used in the room
where the AVR 340 is located, press this button
to place the unit in Standby. When it is used in a
remote room with a sensor that is connected to the
L
Multiroom IR Input Jack ∞, this button turns the
Multiroom system on and off.
∫ AVR Selector: Press this button to turn on
the AVR 340 and to access the volume and mute
controls. The input in use when the unit was last on
will be selected.
ç AM/FM Tuner Selector: Press this button to
K
select the Tuner as the input to the Multiroom system.
Press it again to change between the AM and FM
J
bands. Pressing this button will also turn on the
DISC
I
AVR 340's multiroom system if it is off, even when
SKIP
the AVR is in Standby mode.
H
∂ Input Selectors: Press one of these buttons to
select a specific input. Pressing this button will also
turn on the AVR 340's multiroom system if it is off,
even when the AVR is in Standby mode.
®
≠ Preset Up/Down – Track Skip Buttons: When
the AVR 340's tuner is selected as the input source,
these buttons will move up or down through the list of
stations that have been stored in the preset memory.
When a CD or DVD changer or player is selected,
these buttons activate the Forward or Reverse Track
or Chapter Skip functions.
ƒ Disc Skip Buttons: Press these buttons to
change discs on compatible Harman Kardon CD or
DVD changers or players. When DMP
been selected, the left (–) button has the same effect
as scrolling the iPod's Click Wheel counterclockwise,
and the right (+) button has the same effect as
scrolling the Click Wheel clockwise.
NOTES:
• The Zone II remote may be used in either the same room where the AVR 340 is located or in a separate
room with an optional infrared sensor or A-BUS product that is connected to the AVR 340's Multiroom IR Input
Jack ∞. When it is used in the same room as the AVR 340, it will control the functions of the AVR 340 or any
compatible Harman Kardon products in that room. When it is used in a separate room via a sensor connected to
the Multiroom IR Input Jack ∞, the buttons for Power, Input Source, Volume and Mute will control the source
and volume for the second zone, as connected to the Multiroom Audio Output Jacks ™. (See page 46 for
complete information on using the Multiroom system.)
• To make it easier to follow the instructions that refer to the controls and connectors in this illustration, a larger
copy may be downloaded from the Product Support section for this product at www.harmankardon.com.
å
∫
© Volume Up/Down Buttons: When the Zone II
ç
remote is used in the room where the AVR 340 is
located, press this button to raise or lower the volume
in that room. When it is used in a remote room with a
sensor that is connected to the Multiroom IR Input
∂
Jack ∞, this button will raise or lower the volume in
≠
the remote room.
ƒ
˙ Pause Button: Press this button to activate the
Pause function on compatible Harman Kardon CD,
©
DVD or cassette deck products, or on your iPod when
DMP
The Bridge
˙
I
Stop Button: Press this button to activate the
Stop function on compatible Harman Kardon CD, DVD
or cassette deck products. It will have no effect on
your iPod when DMP
∆ Play Button: Press this button to activate the
Play function on compatible Harman Kardon CD,
DVD or cassette players or on your iPod when DMP
The Bridge has been selected.
TM
˚ Tuning Up/Down – Fast Play Buttons: When
the Zone II remote is used in the same room as the
AVR 340, these buttons may be used to change the
frequency of the tuner. These buttons may also control
the Fast Play or Fast Reverse functions of compatible
Harman Kardon CD, DVD or cassette decks in the
same room, or from a remote room when an IR link
is connected to the AVR 340. These buttons will
select the previous or next track on your iPod when
DMP The Bridge
¬ Mute Button: When the Zone II remote is used
Bridge has
The
TM
in the room where the AVR 340 is located, press this
button to temporarily silence the unit. When it is used
in a remote room with a sensor that is connected
to the Multiroom IR Input Jack ∞, this button
will temporarily silence the feed to the remote room
only. Press the button again to return to the previous
volume level.
ZONE II REMOTE CONTROL FUNCTIONS
has been selected.
TM
The Bridge has been selected.
TM
has been selected.
TM
15