Table of Contents
Advertisement
g
Return the frame adjustment screw to its
initial position.
Memo
• You can use the included multi-purpose
screwdriver, setting the position to "3", when
you loosen or tighten the frame adjustment
screw.
■ Inserting Fabric into Embroidery
Frame (Only Embroidery Frames
with a Lever)
a
Lower the lever.
b
Loosen the frame adjustment screw by
hand, and then remove the inner frame.
c
c
Refer to steps
through
the Fabric" on page 28 to hoop the fabric.
d
Tighten the frame adjustment screw by
hand.
Note
• Do not overtighten the screw.
e
Return the lever to its original position.
■ Using the Embroidery Sheet (Sold
Separately)
When you want to embroider the pattern in a
particular place, use the embroidery sheet with the
frame.
a
With a chalk pencil, mark the area of the
fabric you want to embroider.
a Embroidery pattern
b Mark
PREPARING THE FABRIC
f
of "Inserting
1
29
Advertisement
Table of Contents
