Hexagonal Quilting Borders - Baby Lock SOLARIS VISION BLSA3 Instruction And Reference Manual

Hexagonal Quilting Borders

■ Creating Quilting Border Data
a
With a chalk pencil, mark the quilt top with
the inner outline of the quilting border to
be embroidered.
Measure the longest diagonal of the inner
outline and the width of the quilting border.
a
a Inner outline (used for positioning)
b Longest diagonal
c Width of quilting border
Memo
• Be sure to cut the quilt layers (quilt top,
batting, and quilt backing) with an excess of
about 10 cm (4 inches) so that the quilt will
extend to the edges of the embroidery frame.
• Hexagonal patterns can be embroidered with
a diagonal width of maximum 2600 mm
(approx. 102 inches) and a quilting border
width of maximum 100 mm (approx. 4 inches).
b
Touch .
c
Touch .
d
Select the pattern that you want to
embroider, and then touch
b
c
.
EMBROIDERY APPLICATIONS
e
Specify the size of embroidery frame to be
used and the measurements for the quilting
border, and then touch
a
a Touch or to select the embroidery frame
size.
b Specify the length of the longest diagonal for the
inner outline (1) and the quilting border width (2),
and then touch
.
b
.
3
131