Troubleshooting - IKEA LAGAN 80509004 Manual

ENGLISH
4. Rinse the upper and lower spray arms under
running water.
Use a thin pointed tool (e.g. a toothpick) to
remove particles of soil from the holes of the
arm sprays.
5. After cleaning, replace the arm sprays.
To attach the upper spray arm to the upper
basket, align the center position of the upper
spray arm with the nut then turn it clockwise
to tighten.
To attach the lower arm spray to the bottom
of the appliance, insert the lower arm spray
into position.

Troubleshooting

If the appliance does not start or it stops
during operation, first check if you can solve
the problem by yourself with the help of
the information in the table or contact an
Authorised Service Centre.
Warning! Repairs not properly done may
result in serious risk to the safety of the
user. Any repairs must be performed by
qualified personnel.
Problem and alarm code
You cannot activate the
appliance.
External cleaning
•
•
•
Internal cleaning
•
•
•
•
With some problems, the display shows an
alarm code.
The majority of problems that can occur can
be solved without the need to contact an
Authorised Service Centre.
Possible cause and solution
• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.
Clean the appliance with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive
cleaning pads or solvents.
Carefully clean the appliance, including the
rubber gasket of the door, with a soft damp
cloth.
To maintain the performance of your
appliance, use a cleaning product designed
specifically for dishwashers at least once a
month. Carefully follow the instructions on
the packaging of the product.
Do not use abrasive products, abrasive
cleaning pads, sharp tools, strong chemicals,
scourer or solvents.
Using short-duration programmes regularly
can cause grease and limescale buildup
inside the appliance.
Run long-duration programmes at least twice
a month to prevent the buildup.
47