Before First Use - IKEA LAGAN 80509004 Manual

ENGLISH
2. Within 60 seconds after the appliance is
switched on, press and hold
than 5 seconds and then press
rinse aid setting mode.
The rinse aid indicator flashes.

Before first use

1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the
appliance. Do not use detergent and do not
load the baskets.
After starting a programme, it may take up
to 5 minutes for the appliance to recharge
the resin in the water softener. It seems
that the appliance is not working.
The washing phase starts only after this
procedure is completed. The procedure is
repeated periodically.
3. Press
for more
rinse aid levels on the display:
to enter
4. Press the on/off button to confirm the
setting.
The salt container
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
repeatedly to toggle the following
D1 - D2 - D3 - D4 - D5
The higher the number, the more rinse aid
released by the appliance.
Caution! Use rough salt designed for
dishwashers only. Fine salt increases the
risk of corrosion.
40