Samsung AM030RXMDEH/EU Service Manual page 61

8-1-2. Auto Commissioning & Management System
1) Flow Chart of Pre-Inspection and Auto Commissioning & Management System operation
(1) Pre-Inspection
- Check the installation status of indoor and outdoor units such as piping, communication, power, and refrigerant level.
(2) Auto Commissioning & Management System operation
the tact switch "K1" once.
Auto Commissioning
& Management System
Does it generate an error?
Issue a result report of
Auto Commissioning & Management
(3) Other Things to Note
- When problems occur from multiple components, it is difficult to make an accurate judgment.
- When there is no history of outdoor unit operation (including Auto Commissioning & Management System operation), please try to run the
Auto Commissioning & Management System one hour after an Auto Commissioning & Management System operation.
(At this time, please keep the vacuum mode for five minutes).
- After resolving the problem of "Check Required" item, please try to run the Auto Commissioning & Management System again.
'UP' display
Long-press
System operation.
Does it make a
"Check Required"
message?
Finish
Auto Commissioning & Management System & Amount of Refrigerant Check Function
* Display :
* Display :
Take action for the error and
"Check Required" item
(refer to the service manual).
Run the Auto Commissioning &
Management System
operation again and issue
the result report of Auto Commissioning
& Management System operation.
an error or "Check Required"
Refer to a service center.
61
Does it generate
message?