Connecting The Scanner With Usb; Ibm Surepos - Hand Held Products 3800i User Manual

Connecting the Scanner with USB

A scanner can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the scanner and to the computer.
2. The scanner beeps.
3. Verify the scanner operation by scanning a bar code from the
Symbols in the back of this manual.
Note: The following USB "Plug and Play" codes are supported on specific
models. Refer to
interface applies to your scanner.
For additional USB programming and technical information, refer to the Hand
Held Products "USB Application Note," available at

IBM SurePos

Scan one of the following "Plug and Play" codes to program the imager for IBM
SurePos (USB Handheld scanner) or IBM SurePos (USB Tabletop scanner).
3800i/3800r User's Guide
3800r Models and on page 1-3 to determine if this
Sample
www.handheld.com.
1 - 11