Msi; Check Character - Hand Held Products IMAGETEAM 3800E User Manual

MSI

<Default All MSI Settings>
MSI
On
* Off

Check Character

Different types of check characters are used with MSI bar codes. You can
program the scanner to read only MSI bar codes with Type 10 or Type 11 check
characters. Default = Validate Type 10, but Don't Transmit.
When Check Character is set to Validate and Transmit , the scanner will only
read MSI bar codes printed with the specified type check character, and will
transmit this character at the end of the scanned data.
IMAGETEAM™ 3800E User's Guide 5 - 35