2 X 2 Cassette Unit Remote Controller; Operation Of Buttons - Bosch Climate 5000 Series User Manual

User Manual

4 2 x 2 Cassette Unit Remote Controller

4.1 Operation of Buttons

Figure 20
Button Description
Power Button
MODE Button
SLEEP Button
Temperature Control
SET Button
OK Button
TIMER Button
Table 5
1 4 |
Function
Press this button to turn the air conditioner ON or OFF.
Press this button to select the air conditioner / heat pump's mode of operation.
AUTO --> COOL --> DRY --> HEAT --> FAN
Press this button to Activate/Disable the SLEEP function.
—
The SLEEP function can maintain the most comfortable temperature while saving energy. This
function is available in COOL, HEAT or AUTO modes only.
—
For more information on the SLEEP function operation, please reference the unit's USER MANUAL.
NOTE: While the unit is running in SLEEP mode, it will be cancelled if the MODE, FAN SPEED or Power button is
pressed.
UP Button( ): Push this button to increase the indoor temperature setting in 1°F increments , limited to 86°F.
DOWN Button( ): Push this button to decrease the indoor temperature setting in 1°F increments, limited to 62°F.
Press and hold the UP ( ) and DOWN ( ) buttons together for 3 seconds to alternate the temperature display
between the °C & °F scales.
NOTE: Temperature contol is not available in Fan mode.
Press this button to scroll through functions as follows:
Fresh --> Follow Me --> AP Mode...
The selected symbol will fl ash on the screen. Press the OK button to Confi rm
For more information on the Set function, refer to section 3.4
NOTE: Fresh and AP mode are not available for this system
Press this button to confi rm selection functions.
Press this button to initiate the auto-on time sequence.
Each press will increase the auto-timed setting in 30 minute increments. When the setting time displays 10.0,
each press will increase the auto-timed setting in 60 minutes increments. To cancel the auto-timed program,
simply adjust the auto-on time to 0.0.
Bosch Climate 5000 Series Remote Control (06.2022)