Installation Checklist - Cisco 3700 Series Hardware Installation Manual

Chapter 2 Preparing to Install the Router
•
•

Installation Checklist

The sample installation checklist lists items and procedures for installing a new router. Make a copy of
this checklist and mark the entries when completed. Include a copy of the checklist for each router in
your site log (described in the next section,
Installation checklist for site_____________________________________________
Router name_______________________________________________________
Task
Installation checklist copied
Background information placed in site log
Site power voltages verified
Installation site power check completed
Required tools available
Additional equipment available
Router received
Router quick start guide received
Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700
Series Regulatory Compliance and Safety Information
document received
Product registration card received
Cisco.com contact information label received
Chassis components verified
Initial electrical connections established
ASCII terminal (for local configuration) or
modem (for remote configuration) available
Signal distance limits verified
Startup sequence steps completed
Initial operation verified
Software image verified
OL-2180-07
Baffles can help to isolate exhaust air from intake air, which also helps to draw cooling air through
the chassis. The best placement of the baffles depends on the airflow patterns in the rack, which can
be found by experimenting with different configurations.
When equipment installed in a rack (particularly in an enclosed rack) fails, try operating the
equipment by itself, if possible. Power down other equipment in the rack (and in adjacent racks) to
allow the router being tested a maximum of cooling air and clean power.
"Creating a Site Log").
Verified by
Cisco 3700 Series Routers Hardware Installation Guide

Installation Checklist

Date
2-5