Table of Contents
Advertisement
Available languages
Available languages
In completely stop mode, press the SETUP Button. The setting menu will appear on the screen as below.
◄, ►, ▲, ▼
Using the Direction
Press the OK Button on the Remote Control or the ENTER Button on the unit to enter or confirm the
selection. After setting, press the
- - General Setup Page - -
In General Setup Page:
1.
If TV Shape is selected, using the Direction and ENTER/OK Buttons to set the aspect ratio to
match the playing movie of connected TV.
2.
If Angle Mark is selected, using the Direction and ENTER/OK Buttons to set it
when multi-angles are available in the playing DVD,
3.
If OSD Lang
(On Screen Display Language) is selected, using the
Buttons to set the
OSD language as desired.
4.
If Screen Saver is selected, using the Direction and
On, the screen saver will come on when the unit stops or idle for several minutes.
5.
If Last Memory is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set to
On, the unit will start playback from the position where the disc was stopped last time.
6.
If Text To Speech is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set
to On, the unit will sound when each button is pressed.
In Speak er Setup Page:
If Speaker Setup is selected, press the
1.
If Downmix is selected, using the Direction and
~ If set to Lt/Rt, the rear left or rear right channels will play on both Left and Right Speakers.
~ If set to Stereo, the rear left channel will play on left Left Speaker; the rear right channel will play
on Right Speaker.
SYSTEM SETUP
Buttons to select and highlight the function you
SETUP Button to save the settings and exit.
TV Shape
Wide
Angle Mark
On
OSD Lang
Eng
Screen Saver
On
Off
Last Memory
Off
Text To Speech
G
o
T
o
G
e
n
r e
l a
S
e
u t
p
ENTER/OK
Buttons, the sub-setting
17
P
a
g
e
the multi-angle logo will appear on the screen.
Direction and ENTER/OK
Buttons to set
ENTER/OK
menu will appear.
ENTER/OK
Buttons
to
set it
need to set or reset.
On or Off. If set to On,
it On or
Off. If set to
to
Lt/Rt; Stereo.
Advertisement
Table of Contents
