Sylvania SDVD1052 Instructions Manual page 12

POWER
Press to power on or off the unit.
SOURCE
Press to switch to AV IN mode.
Press it again to resume normal mode.
VOL ( VOLUME +/–
Press to increase or decrease volume.
MUTE
Press to turn off the sound, press again to resume.
MENU
Press to return to disc's menu page (Function depends
on the recording of the disc).
OSD
(On Screen Display)
During playback, press the OSD button repeatedly to
read the information of playback status.
SUBTITLE
During DVD playback, press repeatedly to select the
desired subtitle ( Function depends on the recording
of disc ).
STEP
During movie playback, press STEP Button repeatedly
to play the movie frame by frame.
Press the Play/Pause Button to resume normal
playback.
TITLE
Press to return to disc's title page (Function depends
on the recording
of the disc).
ANGLE
During DVD playback, press repeatedly to select the
viewing angle
( Function depends on the recording of
disc ).
ZOOM
During movies playback,
repeatedly to zoom in/out the picture. In zoom in mode,
press the Direction Buttons to select the parts of the
zoomed picture to watch. This function is not available
on all discs.
CONTROLS
press the ZOOM Button
12
GOTO
(DVD Disc)
~ To select the desired Title and Chapter, press the
GOTO Button once, the Title and Chapter selection
menu will appear on the screen. Use the Direction
and Numeric Buttons to select the desired title and
chapter then press the ENTER Button to start
playback.
~ Select the desired establish time by Title to play,
press the GOTO Button twice, the time selection
table appear on the screen. Using the Direction and
Numeric Buttons to enter the desired establish time.
The unit will start play the movie from the selected
establish time.
~ Select the desired establish time by Chapter to play,
press the GOTO Button three times, the time
selection table appear on the screen. Using the
Direction and Numeric Buttons to enter the desired
establish time. The unit will start play the movie
from the selected establish time.
(CD Disc)
Press once to enter Disc Go To XX:YY, press again to
enter Track Go To XX:YY, press the thiord time to enter
Select track 00/00, where XX stands for the minutes, YY
stands for the seconds, 00 stands for the number of track
and the total track. After setting, it will play immediately
from the track or the point selected.
AUDIO
During disc playback, press repeatedly to select the
desired language or sound track.
the recording of disc).
A-B Repeat
During Playback, press the A-B Button to define where
you want the section to start. Press A-B Button again
to define where you would like the section to end, the
unit will then play the selected section repeatedly and
continuously. Press the A-B Button again to resume
normal playback. (This function is not available on all
discs).
SLOW
During playback, press the SLOW Button repeatedly
to set the slow motion speed. Press
Button to resume normal playback.
(Function depends on
Play/Pause