Close The Top Lid; Washing Finished - Haier XQB50-18 User Manual

* Total time: including the normal water inlet time and drain time. The total washing time may be
influenced by the water inlet pressure and water level.
* Spin time: From the moment the intermittent spinning starts to the moment it stops running ( the time
displayed on spin digitron is from intermittent spinning to the moment before inertia spinning)
* In soaking, after water inlet it will perform soaking for about 10-40 minutes, then perform washing, rinsing
and spinning.
* In selecting QUICK program, the washing machine will set the complete process of wash, rinse and
spin automatically.
5. Push the RESERVATION button to select suitable
reservation wash program
After switching on the power, the reserve program is set to off mode automatically. If you need the washing
process to be finished at reserved time, please push the RESERVATION button to set the reservation wash
program. Refer to RESERVATION BUTTON in Page 11 for selection.
Confirm the operation of reservation program
When the reservation function is activated, the indicator light of the
program you have set will be off. The RESERVATION TIME will be on
and the digitron displays the remained time. During reservation process,
push the RESERVATION button to display the reserve mode.
To change the running program or cancel the reserve setting,
you need to switch off the power and make new selection.
6. Push the START/PAUSE button
5 Close the lid
As the top lid opened, the Washer will automatically
give an alarm and stop running exclusively during
supplying water and drain.
Using process
Using process
RESER-
VATION
Page11
RESERVE
TIME
the washing will be finished after 18 hours.

6 Washing finished

After finishing wash, it will switch off power
automatically
REMAINED
TIME
START START
PAUSE PAUSE
After Finishing wash
alarm automatically