Table of Contents
Advertisement
Memory
Removing the memory
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
2.5-inch
4. Remove the
3.5-inch
5. Remove the
disk-drive
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure.
Steps
1. Carefully spread apart the securing-clips on each end of the memory-module slot.
2. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module
NOTE:
Repeat step 1 to step 2 to remove any other memory modules installed in your computer.
NOTE:
Note the slot and the orientation of the memory module in order to replace it in the correct slot.
Installing the memory
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the memory and provide a visual representation of the installation procedure.
52
Removing and installing components
before working inside your
hard-drive.
hard-drive.
cage.
computer.
Advertisement
Table of Contents
