Rear - Watchguard Firebox T40-CW Hardware Manual

WatchGuard Firebox T40/T40-W Hardware Guide

Rear

Rear view of the Firebox:
Serial Port (Console)
The leftmost port is an RJ45 serial console port. An RJ45 serial cable is not included with the device.
USB Interfaces
The device includes two USB 3.0 interfaces. Connect a USB storage device for USB backup and
restore, or to store a support snapshot. For more information, see
Network Interfaces
The Ethernet interfaces have standard RJ45 connectors and support link speeds of 10, 100, or 1000
Mbps.
The Firebox T40 has five network interfaces. These interfaces are labeled 0/WAN, 1/LAN, 2, 3,
& 4
.
Reset Button
This resets the device. To restore the device to factory-default settings, see
Settings .
Power Switch
Controls the power supplied to the device. Move the switch to position 1 to power on the device, or
position 0 to power it off.
Power Input
An AC power adapter is included with your device. Connect the AC adapter to the device and to a
power source. Use only the supplied AC power adapter.
viii
Fireware Help.
Restore Factory-Default
WatchGuard Technologies, Inc.