Table of Contents
Advertisement
Chapter 3 – Hardware and Specifications
Specifications
Category
1
Performance
Frequency Band (MHz)
Interface
Connectors
I/O
SMS
LED
Physical Description
Weight
Dimensions
Connectors
Antenna
SIM Holder
Pin header
Environment
Operating Temperature
Storage Temperature
1
Humidity
1
Actual performance speeds may be affected by a variety of attributes such as cell tower distance, data loads,
packet sizes, etc. Radio performance may be affected by temperature extremes. This is normal.
2
Device has been tested up to +85° C. UL Recognized @ 85° C.
™
Dragonfly
Nano MTQN-MNG3-B02 Device Guide
Description
3GPP Release 13 LTE Cat M1, 3GPP Release 13 LTE Cat NB1, Coverage
Enhancement Mode A, Release 12 LTE Power Save Mode, PSM, Rel 13 e-
DRX, Cat M1 Half Duplex (Up to 375 kbps downlink and uplink), Cat NB1
Half Duplex (Up to 27.2K kbps downlink and 62.5K kbps uplink), Cat NB1
Non-IP Data Delivery, and 2G GPRS/EGPRS
Europe
LTE FDD (Cat M1/NB1) 700 MHz (B12), 750 MHz (B13), 800 MHz (B20),
850 MHz (B5), 900 MHz (B8), AWS1700 MHz (B4), 1800 MHz (B3), and
1900 MHz (B2)
2G GSM 850 MHz , E-GSM 900 MHz, DCS 1800 MHz, and PCS 1900 MHz
1 UFL (Cellular), 1xMicro USB, 1x 40-Pin Board-to-Board
1 x UART, 1 x HS USB
Mobile Terminate/Mobile Originate PDU / Text mode
Link Status, solid = registered, for default setting use AT+UGPIOC 16, 2
(see AT command guide for details and more options)
less than 0.3 oz (8.5g)
28.96mm x 32.51mm (1.14 x 1.28 inches). Refer to Mechanical Drawings
for details.
1 surface mount U.FL: cellular
1.8 V and 3 V Micro SIM (3FF) card. SIM denotes: Subscriber Identity
Module.
40-pin female for USB or UART
2
-40° C to +85° C (-40° F to +185° F)
-40° C to +85° C (-40° F to +185° F)
15%-93% RH, non-condensing
HARDWARE AND SPECIFICATIONS
7
Advertisement
Table of Contents
