Table of Contents
Advertisement
GETTING STARTED
AT+CFUN=0
AT+UMNOPROF=0
AT+CFUN=15
AT+CFUN=0
AT+CGDCONT=..
AT+UBANDMASK=..
AT+CFUN=15
To configure the supported radio bands: Use the +UBANDMASK command if your MNO is not listed by the
+UMNOPROF command. Refer to your specific carrier regarding available bands.
USB Driver Installation
For the Windows USB driver, refer to the SARA-R4 USB Driver Installation Guide on the product page of the
Multitech website. The driver is located under the Downloads section of the product page.
For the Linux USB driver, if your Linux OS does not automatically detect your device, you may need to execute a
script. This script adds the MTQN vendor ID and product ID to the USB serial driver. Download the zip file which
contains this script and readme file under Downloads on the product page of the website.
22
™
Dragonfly
Nano MTQN-MNG3-B02 Device Guide
Advertisement
Table of Contents
