Installation And Adjustment - Haier HWM60-10 User Manual

Installation and adjustment

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the lint filter
1.Press downward to assmble.
2.Pull upward to detach.
Put down
Put up
Put down
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2 .
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
2.Fasten the nut after adjustment.
Install the bottom plate
After you open the package,
please lean the washing
machine gently down on soft
items ( like the towel cloth,
blanket, etc. ). Install the
bottom plate to the bottom of
the machine with the eight
screws by a cross screwdriver,
Put up then lift the machine up gently.
See to the figure:
Loosen
Before Using
Before Using
Screw
adjustable nut
Fasten
High
Low
Back
Front
Soft items
Bottom plate
adjustable foot