HA1000\HM1000 Automatic Drum Washing Machine Table of Contents Before using Names of Parts--------------inside front cover Matters Needing Attention--------------------1-3 Installation----------------------------------------4-5 Control Panel---------------------------------------6 Operational Functions------------------------6-7 During using Program Selection--------------------------------8 Preparation-----------------------------------------9 Washing Methods---------------------------10-11 Maintenance Maintenance -------------------------------------12 Trouble Shooting--------------------------------13 Technical Specification-------------------------14...
Names of Parts Detergent distributor Operation button Door Porthole Power supply cable Earth terminal Back plate screw (3) Drainage hose Caution and Warning symbols For your safety, any instructions in this manual with this “Warning” sign shall be strictly followed. For your safety and to prevent damages to the washing machine, any instructions in this manual with this “Stop”...
4. For your safety, dry hands before touching for 15A. Refer to a washing machine techni- the washing machine and wear appropriate cian or a Haier designated service point for footwear . power cable replacement. 5. Do not use flammable detergent or dry clean- 6.
Page 4
Matters Needing Attention 9. The washing machine should be place in 8. The washing machine must not be used in a well ventilated area maintaing a space the open or in area of high moisture as water between walls or furniture. droplets may form on electrical components, Air dry the appliance if the washing machine components become wet.
Page 5
Matters Needing Attention 4. Do not wash foam rubber or similar 3. Never place heavy objects ,a heating sponge materials. applianceor a water container on the top panel of the washing machine. 5. Before washing, do up zippers, buttons ,laces 6.
Installation • As shown in figure1 remove all the packing materials (including the foam base). • Remove the packing screws as shown in figure 2. The packing bolts protect the appliance from shock during transportation The steps below should be followed before using the appliance, 1.
The power supply socket and the plug of the washing machine are compatible,if they are not • compatible ,Refer to a washing machine technician or a Haier designated service point for power cable replacement.The washing machine should be connected to an earth before use.
Control Panel A Washing program Turn the knob clockwise to set the desired wash program . Caution: Turn off the power and turn the program knob clockwise for setting desired wash program. B Washing temperature Turn the knob clockwise to set the desired temperature. Temperatures between 30 C-90 C can be setted , Cold wash is se-...
The light will illuminate when the power supply is connected. H Door Lock Light Remember that only when the washer doesn’t work, we can open the door. After the washing program finish,after 3 minutes, when the self-lock meter turn off, we can open the door.
Preparation 2. Water supply 1. Power supply Turn on the tap are ensure that the water is clear Plug in the power supply Caution: Before staring the washing machine turn on the 220V~/50Hz. water faucet to ensure that the water faucet and the water inlet hose are connected correctly and do not leak.
Washing Methods 1. Laundry loading Reference loading • Overalls Evenly load the laundry in the washing (cotton 950g) machine and then tightly close the door • Blended of the washing machine fabric clothes Note: 1) When first using the washing ma- (800g) chine, let it run unloaded for one program to prevent the laundry from being tainted...
Washing Methods 4. Washing temperature Setting Set the washing temperature as required, otherwise, set at position * when heating is not needed. 5. Selecting the function button Select function buttons as required (refer to the directions printed on the operation panel) ,otherwise keep all the button released.
Maintenance 1. Turn of the water and electricity supply 2. Unplug the machine during cleaning and maintenance. Use a soft cloth dampened with after every wash. Open the door to pre- vent the formation of moisture and odors. soapy liquid to clean the machine case and rub- If the washing machine is left idle for a ber components.
Trouble shooting The following circumstances do not constitute problems. Do not contact the main- tenance service until the problem has been confirmed. Problem • Poor connection to power supply • Power failure The washing machine fails to operate • Door is not properly closed •...
Technical Specification Model HA\HM1000 Item Power supply 220V~/50Hz Maximum working current 0.05¡Ü P¡Ü 1 Water pressure (MPa) IPX4 Washing power Spinning power Washing program Heating power 1950 Size (HXDXW) (mm) 850x520x595 Weight (kg)