Cisco 12000 Series Installation And Configuration Manual page 53

Remove the SODIMM0:
Step 5
Insert a DIMM removal tool
a.
Gently move the tools in an outward direction to open the latches and release the module (see
b.
Figure
Caution Some SODIMM sockets use a plastic latch which is enclosed by the metal strain-relief latch. The plastic
latch should never be moved past the metal strain-relief latch.
On 4-port OC-3c/STM-1 ISE and 4-port OC-12c/STM-4c ISE line cards, you must restrain SODIMM0
Caution
as it is released so it does not hit the daughtercard board.
Figure 25
1. DIMM removal tools can be ordered from Cisco (Product ID: MEM-ISE-ATM-TOOL). There is no cost for
this tool.
OL-13004-01
1
between the SODIMM and release latch on each side of SODIMM0.
25).
Using the DIMM Removal Tools to Release the SODIMM
ATM Line Card Installation and Configuration
Line Card Memory
53