Cisco 12000 Series Installation And Configuration Manual page 18

Line Card Cable-Management Bracket
The cable-management system consists of two separate components:
A cable-management tray that is mounted on the chassis. Refer to the appropriate
1.
Cisco 12000 Series Router installation and configuration guide for more information on the
cable-management tray.
2. A cable-management bracket that attaches to a line card.
This section describes the line card cable-management bracket.
cable-management bracket;
Figure 11
Figure 12
ATM Line Card Installation and Configuration
18
Figure 12 shows the multiport line card cable-management bracket.
Single-Port Line Card Cable-Management Bracket
Multiport Line Card Cable-Management Bracket
Figure 11 shows the single-port line card
OL-13004-01