Cisco 12000 Series Installation And Configuration Manual page 49

The user serviceability of memory modules varies from line card to line card. Read this section carefully
Caution
before attempting to remove or install any line card memory module.
This section contains the following procedures:
•
•
•
•
•
Refer to
Removing a DIMM
To remove a DIMM from a line card, follow these steps:
Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 1
Place the line card on an antistatic mat so that the faceplate is nearest to you.
Step 2
Locate the DIMM sockets on the line card.
Step 3
Note
Figure 21
OL-13004-01
Removing a DIMM
Installing a DIMM
Removing a SODIMM
Installing a SODIMM
Checking the Installation of Line Card Memory
Figure 18, Figure 19 and
Some line cards use DIMM sockets equipped with dual release levers, as shown in
other line cards use DIMM sockets equipped with a single release lever, as shown in
Both DIMM sockets operate in the same general way.
DIMM Socket with Dual Release Levers
Figure 20 for the location of the memory on your line card.
ATM Line Card Installation and Configuration
Line Card Memory
Figure 21;
Figure 22.
49