Related Manuals for Beko WTV7611BWW
Summary of Contents for Beko WTV7611BWW
- Page 1 Washing Machine User Manual WTV7611BWW Document Number : 2820530079_EN / 24-03-22.(1:20)
- Page 2 This product was manufactured using the latest technology in environmentally friendly conditions.
-
Page 3: General Safety Instructions
General safety instructions This section includes security instructions which may help prevent the injuries and material damage risks. All kinds of warranties shall be invalid if these instructions are not observed. 1.1 Life and property safety Never place the product on a carpet-covered floor. Electrical parts will get overheated since air cannot circulate from under the device. -
Page 4: Electrical Safety
Packaging materials may be dangerous for the children. Keep packaging materials in a safe place away from reach of the children. Electrical products are dangerous for the children. Keep the children away from the product when it is in use. Do not allow them to play with the product. -
Page 5: Important Instructions For Environment
Important instructions for environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. -
Page 6: Technical Specifications
Technical specifications Supplier name or trademark Beko WTV7611BWW Model name 7137242000 Rated capacity (kg) Maximum spin speed (rpm) 1200 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available Electrical input (V/Hz) -
Page 7: Appropriate Installation Location
4.1 Installation Your washing machine automatically detects the amount of laundry placed inside when selecting a program. While installing the product, before the first use, calibration should be done to ensure that the laundry amount is detected in the most accurate way. To do this, select the Drum Cleaning* program and cancel the spin function. -
Page 8: Connecting Water Supply
CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be damaged. Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future. Install the transport safety bolts in reverse order of the disassembly procedure. -
Page 9: Adjusting The Feet
• If the length of the hose is too short, use it by adding an original extension hose. The overall length of the hose shall not be longer than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak. -
Page 10: Sorting The Laundry
4.2 Preparation 4.2.1 Sorting the laundry * Sort laundry according to type of fabric, color, and degree of soiling and allowable water temperature. * Always obey the instructions given on the garment tags. 4.2.2 Preparing laundry for washing • Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons will damage the machine. -
Page 11: Using Detergent And Softener
4.2.6 Using detergent and softener When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if available. The detergent drawer is composed of three compartments: –... -
Page 12: Using Liquid Detergents
Using liquid detergents If the product contains a liquid detergent cup: • Put the liquid detergent container into the compartment no “2”. • If the liquid detergent lost its fluidity, dilute it with water before putting it into the detergent container. If the product is equipped with a liquid detergent part: •... -
Page 13: Tips For Efficient Washing
• Oxygen-based decolorant can be used with the detergent; however, if it is not at the same consistence, first put detergent in the compartment number “2” in the detergent dispenser and wait for the machine to flush the detergent when taking in water. While the machine continues taking in water, add decolorant in the same compartment. -
Page 14: Preparing The Machine
4.3 Operating the product 4.3.1 Control panel 1 - Programme Selection knob (Uppermost 5 - Delayed Start Indicator LEDs position On / Off) 6 - Programme Follow-up LEDs 2 - Spin Speed Indicator LEDs 7 - Start / Pause Button 3 - Child Lock Enabled LED 8 - Delayed Start Setting Button 4 - Door Lock Enabled LED... -
Page 15: Programme And Consumption Table
4.3.4 Programme and consumption table Programme 2,45 1200 1,90 1200 Katoen 1,10 1200 0,58 1200 1,95 1200 Katoen 60º met Voorwas 0,975 1200 40*** 0,620 1200 Eco 40-60 40*** 0,343 1200 40*** 0,80 1200 Synthetisch 0,26 1200 0,15 1200 Xpress 0,47 1200 0,85... -
Page 16: Main Programmes
Consumption Values (EN) 0,975 1200 03:27 Eco 40-60 0,620 1200 02:41 0,343 1200 02:41 Katoen 0,580 1200 03:15 Katoen 60º met Voorwas 1,950 1200 03:35 Synthetisch 0,800 1200 02:10 Xpress 0,150 1200 00:28 The values given for programmes other than the eco 40-60 programme are indicative only. 4.3.5 Main programmes Depending on the type of fabric, use the following main programmes. -
Page 17: Special Programmes
• Hemden (Shirts) This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. Pre-treatment algorithm is executed. • Apply the pre-treatment chemical on your garments directly or add it together with detergent when the machine starts to take water from the main washing compartment. -
Page 18: Delayed Start
4.3.9 Delayed Start With the Delayed Start function the startup of the programme may be delayed up to 3, 6 or 9 hours. Do not use liquid detergents when you set Delayed Start! There is the risk of staining of the clothes. 1. -
Page 19: Progress Of Programme
To deactivate the Child Lock: Press and hold Speed and Delayed Start buttons for 3 seconds while any programme is running. While you are holding for 3 seconds, the "Child Lock Enabled LED" will flash. You can release the buttons when the LED turns off completely. In addition to the method above, to deactivate the Child Lock, switch the Programme Selection knob to On / Off position when no programme is running, and select another programme. -
Page 20: Adding Or Taking Out Laundry
Adding or taking out laundry You can load/unload laundry when a programme is running if the water level is appropriate to open the door. To do this: 1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light of the relevant step during which the machine was switched into the pause mode will flash. -
Page 21: Maintenance And Cleaning
4.4 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 4.4.1 Cleaning the detergent drawer Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent accumulation of powder detergent in time. -
Page 22: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. -
Page 23: Troubleshooting
Troubleshooting Problem Reason Solution Program does not start after Start / Pause / Cancel button was not pressed. • *Press the Start / Pause / Cancel button. closing the door. It may be difficult to close the loading door in case •... - Page 24 Problem Reason Solution Programme time does not Timer may stop during water intake. • Timer indicator will not countdown until countdown. (On models with the machine takes in adequate amount display) (*) of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water.
- Page 25 Problem Reason Solution It does not rinse well. The amount, brand and storage conditions of the • Use a detergent appropriate for the washing detergent used are inappropriate. machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
- Page 26 Problem Reason Solution Foam is overflowing from the Too much detergent is used. • Mix 1 tablespoonful softener and ½ l water detergent drawer. and pour into the main wash compartment of the detergent drawer. • Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”.
- Page 27 Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in the user manuals for self-repair or which are available in support.beko.com, might give raise to safety issues not attributable to Beko, and will void the warranty of the product.