Table of Contents
Advertisement
Medium, Strong, Off or Low.
Adaptive Luma Control: To adjust changes in the
luminance of the
picture: Medium, Strong, Off or Low.
Flesh Tone: To adjust the flesh colors: High, Off,
Low or Medium.
Blue Stretch: To set Blue Stretch: On and Off.
Game Mode: To set Game Mode: On and Off.
Overscan: This function is active and visible in
menu only when the signal is EIA timing (480i /480p
/720p /1080i /1080p) in RGB color space in HDMI/DVI
input.
Audio Menu Options
Sound can be adjusted for any input as follows:
A
Press
MENU button and then
the following menu appears on the screen.
Video
Balance
Bass
Audio
Treble
SRS TS XT
Channel
Equalizer
Speaker
Function
SPDIF Type
AVL
Lock
Audio Only
Audio
B
Press
/ ENTER button to enter the menu and
CH+/- button to go up and down to select the
desired option.
C
Press
/ ENTER button to confirm and
/
button increase and decrease the level to
adjust the selected option to your preference.
D
Repeat step 2 and step 3 until desired audio quality
has been achieved.
Function
Balance: Press
button and
/
confirm, then press
output between left and right speakers.
Bass :Press
button and
/
to confirm, then press
decrease the level of the lower-pitched sounds.
Treble :Press
button and
/
/
button until
0
50
50
On
Off
Off
Off
Off
CH+/-
ENTER
Adjust
Select
EXIT
Back
VOL+/-
/
to
ENTER
to adjust the audio
/
/
button
ENTER
to increase or
/
/
ENTER
to confirm, then press
decrease the level of the higher-pitched sounds.
SRS TS XT : To turn the simulated surround sound on
or off.
Equalizer : To adjust the equalizer Off /Rock /Pop /Live
/Dance/ Techno /Classic and Soft.
Speaker : To adjust
the speaker on or off.
SPDIF Type : To
adjust the SPDIF output: Off /Dolby
Digital and PCM.
AVL : This will reduces the differences in volume level
among broadcasters.
Audio Only : Press
/ENTER button to confirm, the
following display will appear on the screen:
Press VOL- to select OK, then press OK to confirm. The
TV screen will be black and no picture , but the sound
is still normal.
Press POWER button to exit Audio Only mode
OK
You can press POWER button to reveal the picture on
the screen.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound
signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the TV
station transmits the proper signals.
Mono sound is automatically received if the broadcast
is only in Mono; even though Stereo or SAP has been
selected.
Select Mono if you want to listen to mono sound during
stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
A
Use the SAP button to select your desired MTS
mode in a analog signal. Each time you press the
SAP button, Mono, Stereoor SAP appear. If other
languages are available on the digital signal, select
them with the SAP button.
B
Press EXIT button to save and return to TV viewing.
Operation
to increase or
/
Cancel
Haier LCD HDTV/DVD
EN-12
Advertisement
Table of Contents
