Function Menu Options - Haier HL19R1 User Manual

Menu Operations

Function Menu Options

1. Press MENU button and
screen.
2. Press /
down to select the desired option .
3.Press /
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press
OSD Timeout: Press
time of the OSD display.
OSD Transparency: Press
to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press
Zoom and Cinema to change the display mode. ( display mode may differ from
different inputs)
Blue Screen: Press
3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.
Time Setup: Press /
Time Zone: Press
Downloaded from www.Manualslib.com
/
Video
Audio
Channel
Function
Lock
Function
ENTER button to enter the Function menu and
ENTER button to confirm and
/ button to select language of the OSD.
/ to select Middle, Short and Long to change the
/
/ to select among Full Screen, Normal, Wide,
/ to select On , the screen will be in blue after
ENTER to enter the submenu.
/ to select the appropriate time zone.
manuals search engine
until the following menu appears on the
Language English
OSD Timeout Short
OSD Transparency Middle
Screen Mode Full screen
Blue Screen On
DPMS On
Time Setup
Closed Caption
Default
CH+/-
Select EXIT
VOL+/-
/ increase and decrease
to select among Low, High and Middle
Back
/ to go up and