JVC TH-C60J Service Manual page 18

3.2.4 Removing the mother board
(See Fig.8 to 11)
(1) Remove the two screws F attaching the LED board. (See
Fig.8)
(2) Remove the two screws G attaching the heat sink bracket.
(See Fig.9)
(3) Remove the two screws H attaching the mother board.
(See Fig.9)
(4) Release the lock of connectors CN372,
connect the amp board and mother board, and then re-
move the mother board. (See Fig10 and 11)
F
Heat sink bracket
H
1-18 (No.MB511)
CN501 and CN502
F
Fig.8
G
G H
Fig.9
Amp board
CN372 CN501
Fig.10
Amp board
Mother board
Fig.11
Mother board
CN502