JVC TH-C60J Service Manual page 11

3.1.2 Removing the front panel assembly
(See Fig.3 to 5)
(1) Disconnect the card wires from connector CN450,
and CN457 of the main board. (See Fig.3)
(2) Remove the one screw C attaching the earth wire to the
main board. (See Fig.3)
(3) From the bottom side of main body, remove the two screws
D attaching the front panel assembly. (See Fig.4)
(4) Disengage the hook a of the bottom side and hook b of the
both side of front panel assembly, and then remove the
front panel assembly. (See Fig.4 and 5)
CN451
CN450
CN457
Fig.3
D a
Fig.4
b
Fig.5
CN451
C
D
(No.MB511)1-11