3.1.3 Removing the DVD changer mechanism assembly
(See Fig.6 to 8)
(1) From the back side of main body, remove the one screw E
and one screw F attaching the DVD changer mechanism
assembly. (See Fig.6)
(2) Disconnect the connector wire from connector
the DVD module board. (See Fig.7)
(3) Disconnect the card wires from connector CN701, CN702,
CN703
and
CN801
of the DVD module board. (See Fig.7)
(4) Remove the four screws G attaching the DVD changer
mechanism assembly. (See Fig.8)
1-12 (No.MB511)
J
CN704
of
CN703
CN704
G
H
L
E
F
M
Fig.6
CN701
CN801
CN702
Fig.7
Fig.8
G