Advertisement
2
Place the face, face down, on a soft, non-scratching surface. Install the 564 Electric mounting brackets onto
the back of the face.
3
Pull the electric fireplace out of the mantel (or built-in location). Attach the cove covers and face following the
directions below. Slide the fireplace back into place to complete the installation.
Hang the 564 E cove
cover over the glass -
this keeps light from
exiting the grill opening
along the top of the face.
c
Lift the face up slightly, tilt
it forward and insert the
top hooks until the face
locks in place.
Page 6 of 6
564 SS / 564 E Arched Face
Remove and
discard the
a
hinge assembly
from the face.
a
b
Tilt the face back slightly and
insert the bottom hooks into
the slots on the fireplace.
17601470 - 9/14/11
Classic Black 95400402
French Country Black 95400408
c
Attach the lower 564 E bracket. Use
b
the nuts removed earlier and one of the
nuts included with this kit.
Nickel 95400405
Attach the upper 564 E
bracket. Use the nuts
included with this kit.
Repeat steps "a" through
d
"c" for the opposite side.
Before installing the face
e
verify the lower grill is
centered. Loosen the nuts
and adjust if necessary.
© Travis Industries, Inc.
Advertisement
