Toshiba FlashAir III Quick Start Manual page 9

This option allows you to use the same network settings,
even after the card is formatted.
❖
NOTE: The following procedure is required to reset the SSID
and password to their initial state.
❖
❖
❖
Wireless LAN startup mode
When
Wireless LAN Startup mode
window appears. This window allows you to set the wireless LAN
startup mode.
There are two startup modes, Automatic startup mode and Manual
startup mode. Select a startup mode, and then click
❖
Wireless LAN startup mode: Automatic startup mode
In this mode, the wireless LAN functionality of FlashAir III
wireless SD™ Memory Card runs automatically when the
device/computer the FlashAir III wireless SD™ Memory Card
is inserted into is powered on.
The SSID and password settings are maintained,
even if you format FlashAir III.
Initialize the card using the FlashAir Tool (version
3.00 or later).
The "Initialize the card" feature may cause all data
stored in the FlashAir III wireless SD™ Memory
Card to be lost.
Back up your data to other storage media before
formatting the FlashAir III wireless SD™ Memory
Card.
Network settings
is selected, the following
9
.
Apply