Toshiba FlashAir III Quick Start Manual page 12

12
Format the Card
Format the Card
If you format the FlashAir III wireless SD™ Memory Card using an
SDHC™ Memory Card compatible device (e.g. digital still camera),
initialize the card as follows to reset its wireless LAN functionality.
When
Format the Card
This feature formats the FlashAir III wireless SD™ Memory Card and
resets it to the factory default settings.
All data stored in the FlashAir III wireless SD™ Memory Card may be
lost. Back up all data to other storage media before using this
feature.
The initial setup of the FlashAir III wireless SD™ Memory Card is
again required after formatting.
1 Click
Format
2 When the following message appears, make sure you have a
backup of all important data.
When you are ready, click
is selected, the following window appears.
.
Yes
.