Toshiba FlashAir III Quick Start Manual page 10

10
Network settings
❖
Auto Start Timeout Setting
If there is no attempt to connect to the FlashAir III wireless
SD™ Memory Card from a device (e.g. a smartphone) within
the designated time previously set in the timeout settings, the
wireless LAN functionality automatically turns off.
To restart the wireless LAN functionality, turn off the
device/computer the FlashAir III wireless SD™ Memory Card
is inserted into, and then turn it on again.
Automatic startup mode is the default settings.
❖
Wireless LAN startup mode: Manual startup mode
In this mode, you can enable/disable the wireless LAN
functionality by changing the write-protection status of the
wireless LAN startup image file.
First set your favorite photo as the wireless LAN startup
image.
When this image file is set to unprotected using the device's
settings, the wireless LAN functionality is enabled.
When it is set to protected, the wireless LAN functionality is
disabled.
The status of the wireless LAN functionality changes only
when you change the write-protection status of the wireless
LAN startup image file.