Summary of Contents for Toshiba FlashAir W-04 Series
Page 1
FlashAir™ Settings: Internet pass thru mode ● This function is available on the FlashAir W-04, FlashAir W-03 and FlashAir W-02 series with card software version F19BAW3AW2.00.02 or later. Internet pass thru function enables the Internet connection using other access points through FlashAir.
Page 2
You can browse the web site on the Internet with your device is connected to FlashAir. To use Internet pass thru mode please set up the FlashAir in one of the following ways. How to set up Internet pass thru mode using FlashAir App for Android™...
Page 3
Step 4 Open “Settings” > “FlashAir Settings” > “Internet pass thru mode”. Turn “Internet pass thru mode” on and enter the SSID of the access point in the SSID field and the password of the access point in the Password field. Then, click the “Done” button. ®...
How to set up Internet pass thru mode using FlashAir Configuration Software Step 1 Start the FlashAir configuration software (Ver.2.02 or later) and click on “Network Settings”. Step 2 Check "Enable "internet pass thru mode"" check box to enable Internet pass thru mode. And enter the SSID and password of the access point FlashAir will connect to into the “Access Point SSID”...
Page 5
How to share contents with SNS ● Photos taken with personal authentication and GPS enabled status might reveal your personal identity. Be cautious about posting your photos on SNS and other Internet sites. ● If you want to edit photos before sharing, select "Edit" in selection mode. After editing, select "Share" on the top right of the edit photo screen.