Agilent Technologies Truevolt Series Operating And Service Manual page 27

LAN Configuration Procedure
There are several parameters that you might need to set to establish network communication using the LAN interface.
Primarily, you will need to establish an IP address. You might need to contact your network administrator for help in
establishing communication with the LAN interface.
If your instrument has the secure (SEC) option, the instrument must be unsecured to change most LAN
settings.
1. Press [Utility] > I/O Config > LAN Settings.
2. You can select Modify Settings to change the LAN settings, or you can turn LAN Services on and off or restore
the LAN settings to default values.
3. Press Modify Settings.
To access most items on this screen, use the first softkey to switch from DHCP to Manual. With DHCP on, an IP
address will automatically be set by DHCP (Dynamic Host Configuration Protocol) when you connect the
instrument to the network, provided the DHCP server is found and is able to do so. DHCP also automatically deals
with the subnet mask, gateway address, DNS, WINS, and domain name, if required. This is typically the easiest
way to establish LAN communication for your instrument; all you need to do is leave DHCP on. Contact your LAN
administrator for details.
4. Establish an "IP Setup."
If you are not using DHCP (the first softkey is set to Manual), you must establish an IP setup, including an IP
address, and possibly a subnet mask and gateway address. The IP Address and Subnet Mask buttons are on the
main screen, and you press More to configure the Gateway.
Contact your network administrator for the IP address, subnet mask, and gateway to use. All IP addresses take the
dot-notation form "nnn.nnn.nnn.nnn" where "nnn" in each case is a byte value in the range 0 through 255. You
can enter a new IP address using the front-panel arrow keys.
5. Configure the "DNS Setup" (optional)
DNS (Domain Name Service) is an Internet service that translates domain names into IP addresses. Ask your
network administrator whether DNS is in use, and if it is, for the host name, domain name, and DNS server
address to use.
Agilent Truevolt Series DMM Operating and Service Guide
Do not enter leading zeros.
27