Panasonic KV-S6055W Service Manual page 11

- This setting will remain until it is changed to another setting.
4.9.2. Setting the SCSI ID and Terminator
1. Press the OTHERS key.
Enters setting modes other than SCAN, COUNTER, or IMPRINT
and displays the version.
2. Press the MODE key.
Press the MODE key [
fourth setting.
3. Press the SELECT [
setting.
The [ ] key moves to the next ID as shown below.
The [ ] key moves to the previous ID.
4. Press the MODE key [
To activate the SCSI ID settings, press the HOME key to return to
"READY", then turn the unit off and on.
] to display the SCSI ID, which is the
] key or [ ] key to select the desired
] to switch to the terminator setting.
11