Download Print this page

Electrolux EMT5704 User Manual page 17

Hide thumbs Also See for EMT5704:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
NutriPlusTM (Anti-Oxidant Filter)
Installing Filter Cartridge
Your filter can be found in the crisper. To enjoy
the full benefit of NutriPlusTM, it is important
to install it after turning on the refrigerator.
For installation, please follow the following
instruction.
1. Remove plastic wrap
2. Hook the filter to the back of the crisper bin.
Replacing Filter Cartridge
The filter is located at the back of the crisper.
Hold the filter, move upwards to release from
the hooks.
Glass shelves
To remove the shelves, gently pull them forward
until the shelf comes clear of the shelf guides.
To return the shelf, make sure there is nothing
behind that may obstruct movement. Gently
push the shelf, into the cabinet and back into
position.
Freezer shelf
Remove the freezer shelf by lifting the catches
on the right and left underside of the shelf to
release the shelf then pull the shelf toward you.
Drawers fitted with telescopic slides
To remove the drawer for cleaning
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward
and lifting the front to unhook it from the
slides. Once you have removed the drawer,
ensure the slides are pushed back so they
are fully closed.
WARNING
Never close the door while the
telescopic slides are extended. This may
damage the slide and/or refrigerator or
cause the slide to become disengaged
from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all
the way.
2. Slide the drawer into place over the slides
and push the bin in until it stops.
3. Drop drawer into position.
CAUTION
Never close the door while the
telescopic slides are extended. It may
damage the slide and/or the refrigerator
or cause the slide to become
disengaged from the refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the
other side of the freezer.
NOTE: this is only possible on Top mount
models.
1. Remove the ice bin and ice cube tray. If the
ice tray assembly is frozen to the carriage,
simply squeeze the tray and shelf together to
break the ice.
EN
17

Advertisement

loading

This manual is also suitable for:

Ebe5304