Functions - Haier XQG65-11SU User Manual

Functions

D Power Button
Push the button in to have your washer "ON". The light
will turn on indicating that power is "ON". Push the button
out to have your washer "OFF". The light will go off
indicating that power is "OFF".
E Load Button
Push the button in if you want to reduce water usage
during the rinse cycle. Push the button out if you want
maximum water usage during the rinse cycle.
Note: Half=Minimum Water Rinse
Full=Maximum Water Rinse
F Power light
The light turns on when the appliance is connected to
the power supply and switched on.
G Soak Button
Push the button in to have soak "OFF" and push the
button out to have soak "ON". After the rinse water fill and
the softener is dispensed, the cycle will allow the clothes
to soak before completing the rinse portion of the wash
cycle.
H Spin Button
If you want to extract more water from your clothes during
the wash cycle, push the button out. Clothes will be drier
when this option is selected.
If you do not want to extract water from your clothes using
the spin cycle, push the button in. If this option is
selected, only the excess water in the tub will drain
leaving the clothes wet.
Note: When the spin cycle is in the OFF position, the
machine will not automatically go to the spin dry function.
I Door Button
Push the button to open the door. This wash & dry combo
unit has built-in safety lock device. You must wait 3
minutes to open the door after the machine has stopped.
7