Table of Contents
Advertisement
WARNING: Ensure that the seat belt is positioned
correctly and that the shoulder anchor is locked
into position before driving. Riding in a moving
vehicle with the seat belt positioned incorrectly or
with the shoulder anchor not locked into position
can reduce the effectiveness of the seat belt in a
collision.
To Release a Belt
Hold the belt near the buckle to prevent the belt from
retracting too quickly, then press the button on the
buckle. The belt retracts automatically. Ensure there is
no obstruction that prevents the belt from fully
retracting. The belt should not hang loose. If a seat belt
does not fully retract, contact Tesla.
Wearing Seat Belts When Pregnant
Do not put the lap or shoulder sections of the seat belt
over the abdominal area. Wear the lap section of the
belt as low as possible across the hips, not the waist.
Position the shoulder portion of the belt between the
breasts and to the side of the abdomen. Consult your
doctor for specific guidance.
WARNING: Never place anything between you and
the seat belt to cushion the impact in the event of
a collision.
Seating and Safety Restraints
Seat Belt Pre-tensioners
The front seat belts are equipped with pre‑tensioners
that work in conjunction with the airbags in a severe
frontal collision. The pre‑tensioners automatically retract
both the seat belt anchor and the seat belt webbing,
reducing slack in both the lap and diagonal portions of
the belts, resulting in reduced forward movement of the
occupant.
The second row outboard seats are equipped with
shoulder pre-tensioners to retract the seat belt webbing
to reduce forward movement of the occupant.
If the pre-tensioners and airbags did not activate in an
impact, this does not mean they malfunctioned. It
usually means that the strength or type of force needed
to activate them was not present.
WARNING: Once the seat belt pre-tensioners have
been activated, they must be replaced. After any
collision, have the airbags, seat belt pre-tensioners
and any associated components checked and, if
necessary, replaced.
Testing Seat Belts
To confirm that seat belts are operating correctly,
perform these three simple checks on each seat belt.
1. With the seat belt fastened, give the webbing nearest
the buckle a quick pull. The buckle should remain
securely locked.
Seat Belts
33
Advertisement
Table of Contents
