Table of Contents
Advertisement
1. Open the hood.
2. Clean around the filler cap before opening it to
prevent dirt from entering the reservoir.
3. Open the filler cap.
4. While avoiding spilling, fill the reservoir until the fluid
level is visible just below the filler neck.
5. Wipe up any spills immediately and wash the
affected area with water.
6. Reinstall the filler cap.
NOTE: Some national or local regulations restrict the use
of Volatile Organic Compounds (VOCs). VOCs are
commonly used as antifreeze in washer fluid. Use a
washer fluid with limited VOC content only if it provides
adequate freeze resistance for all climates in which you
drive Model X.
CAUTION: Do not add formulated washer fluids
that contain water repellent or bug wash. These
fluids can cause streaking, smearing, and
squeaking or other noises.
WARNING: In temperatures below 4° C, use a
washer fluid with antifreeze. In cold weather, using
a washer fluid without antifreeze can impair
visibility through the windshield.
WARNING: Windshield washer fluid can irritate
eyes and skin. Read and observe the instructions
provided by the washer fluid manufacturer.
Maintenance
Fluid Reservoirs
193
Advertisement
Table of Contents
